User Manual for VIKVIZ Camera

Hello Customer,

Here the notice for how to using vikviz camera for model 4818/2504/2387C/2087C/2385I/2085I/2185I and etc.

For using the Vikviz camera as above model, you can using with Hikvision system by plug&play.

And for using alone or test, you need to find the camera firstly, then you can manage the camera on your computer and through your mobile phone APP.

Firstly please make sure the computer and the camera are in the same IP segment, so that you can login the camera’s web page later. For example, the camera’s default IP address is 192.168.1.110, Subnet mark is 255.255.255.0. Then you need to find your computer’s IPv4 address to see if it have a IPv4 address of the 192.168.1.XXX. The XXX stand for 1 to 254, but 110, as it could not be the same as the camera’s or will occur IP conflict. If the camera and the computer are in the different IP segment, please either to change the camera’s IP segment as the computer’s or add an 192.168.1.XXX. in your computer’s Advanced TCP/IP Setting. If you don’t know how to do that, please don’t hesitate to email, you can email me to after-sale@ikviz.com.

Then using the SADP Tool or AjDevTool to search the camera, the device search tool would show your the IP address of the camera.The SADP Tool you can download and install in Hikvision site or app store or Google play, and the AjDevTool you can download and install from our Vikviz site.

And then you can enter the IP address in your browser URL bar to login the camera's web page, with the account(admin) and the default password 123456,the set all the configurations. And enable the P2P, and scan the QR code to download the APP. Also you can set the factory setting.

I have attache the pictures for your as reference, please have a check.

If you have any question, please don’t hesitate to contact me, and you can offer me your phone number, so that we can have a call for remote guidance.

Best regards,

VIKVIZ Team